Hot Peel DTF PET Film Roll – 60cm × 100m

Hot Peel Film Specifications and Pressing Guide

This 60cm × 100m hot-peel DTF film roll carries your printed design through powdering, curing and heat transfer. Its hot-release format lets you peel shortly after pressing when the transfer has been prepared using suitable materials and validated settings.

Product Specifications

• Width: 60cm / 600mm
• Length: 100 metres
• Material: PET transfer film
• Peel type: Hot peel
• Process: Direct to film garment transfers

Compatibility

Use with a DTF printer that accepts a 600mm-wide roll, compatible DTF pigment inks and hot-melt adhesive powder. Check roll-feed requirements and material compatibility before ordering. This is a film consumable, not a printable fabric or self-adhesive vinyl.

Pressing Instructions

Standard Setting

• Temperature: 160°C
• Time: 6–7 seconds
• Peel: Wait approximately one second after pressing before hot peeling.

Alternate Setting — Fabric Dependent

• Temperature: 145°C
• Time: 3–5 seconds

These are the starting settings published for this product. Validate temperature, time, pressure and peel behaviour on a sample garment before a production run. Powder curing is a separate stage and must follow the instructions for your adhesive and equipment.

Application Tips

• Test the complete ink, film, powder and fabric combination.
• Check edges and fine details after peeling before approving the transfer.
• The listing recommends a second press after peeling; use a validated finishing procedure for your garment.
• Record successful settings for repeat orders.

Why Choose This Film?

The hot-peel format suits workflows where operators want to release the carrier shortly after pressing. The 100-metre roll provides a defined replenishment quantity for compatible wider-format DTF printers.

Frequently Asked Questions

Is this the same as hybrid hot-and-cold peel film?

No. This listing specifies hot peel. Choose the separate hybrid film if you require a product listed for both release methods.

Will this fit an A3 desktop printer?

The roll is 600mm wide. Check your printer’s supported media width and roll-feed arrangement; do not assume that a desktop DTF printer can accept it.

Are ink and powder included?

This listing is for the film roll. Order compatible ink and powder separately.

Complete Your DTF Setup

• CMYK + White DTF Ink Bundle
• DTF Hot-Melt Adhesive Powder
• Hybrid Hot-and-Cold Peel Film